Sub Monster ST by Nakul Tiruviluamala
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 89% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 3861.35Hz (185) and is modulated by Note Vel, LFO 2, VCF Env.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 28.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 58.
Low-pass filter envelope amount is modulated by Note Vel.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Filter has no resonance.
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±1 cents (5).
Oscillators drift level is manually set to 41. Drift rate is 8
Portamento pitch
Portamento time is manually set to 17.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 58 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 2 modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 28 |
| name | value |
|---|---|
| LFO 2 Rate | 0.04Hz (0) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 0.04s (6) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 58 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 1.13s (128) |
| VCF Envelope Sustain Level | 50% (128) |
| VCF Envelope Release Time | 0.11s (18) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |